Search This Blog

Translate

Friday, September 22, 2017

Loosening and tightening the axle nut on 2015 Ducati Scrambler

I recently adjusted the chain on the Scrambler. It's a 30mm nut so I grabbed my Harbor Freight impact sockets and an impact wrench and got started.



The impact wrench is probably over-kill for loosening the nut.


After adjusting the chain need to torque the nuts back down.  The Ducati spec is 106 ft. lb.

Just set the torque to proper setting and smoothly tighten until the wrench clicks. 

2 comments: